The earliest examples of die casting by pressure injection
- as opposed to casting by gravity pressure - occurred in the mid-1800s. A patent was awarded to Sturges in 1849 for the first manually operated machine for casting printing type. The process was limited to printer's type for the next 20 years, but development of other shapes began to increase toward the end of the century. By 1892, commercial applications
included parts for phonographs and cash registers, and mass production of many types of parts began in the early 1900s.
The first die casting alloys
were various compositions of tin and lead
, but their use declined with the introduction of zinc
alloys in 1914. Magnesium
alloys quickly followed, and by the 1930s, many of the modern alloys still in use today became available.
The die casting process has evolved from the original low-pressure injection method to techniques including high-pressure casting - at forces exceeding 4500 pounds per square inch - squeeze casting and semi-solid die casting. These modern processes
are capable of producing high integrity, near net-shape castings with excellent surface finishes.
The Future refinements continue in both the alloys
used in die casting and the process itself, expanding die casting applications into almost every known market. Once limited to simple lead type, today's die casters can produce castings in a variety of sizes, shapes and wall thicknesses that are strong, durable and dimensionally precise.